Swing Gate Repair for Homes and Acreage
A swing gate hangs its whole weight off one post. Over time the hinges wear, the post leans, the frame twists, and the gate that used to close with a nudge starts dragging and missing the latch.
Open 24 hours, 7 days a week

What you might be seeing
Far end drags on the drive
The gate has dropped. Look at the hinges for wear, the post for lean and the frame for twist.
Latch misses its keeper
Small sag at the hinge becomes a big miss at the latch. Bolting the keeper lower only hides the problem.
Two leaves meet unevenly
On a double gate, one leaf has dropped or the opener limits no longer match.
Squealing or popping hinges
Dry or worn pins. A hinge that pops as the gate moves is close to failing.
Swings open in the wind
A latch, lock or opener arm no longer holds the gate firmly closed.
Opener arm bracket is loose
The arm is pulling the bracket off the post or gate, and the gate stops where it pleases.
Finding where the sag starts
Sag has three common sources, and the fix depends on which one you have. If the post is leaning, the whole gate tips with it and new hinges will not help. If the hinges are worn, the gate drops at the latch while the post stays plumb. If the frame has racked, the gate itself has gone out of square, often on wood gates or long ranch gates without enough bracing.
We check the post with a level, then the hinges, then the frame. On many gates the answer is a mix: a slightly tired post plus worn hinges. Fixing both is the only way the gate stays right.
Wood, iron and pipe gates
Cedar and other wood gates move with the seasons and need good diagonal bracing to stay square. Ornamental iron gates are heavy for their size and lean on their hinges hard. Pipe and tube ranch gates are long and light, so the leverage on the hinge post is huge even when the gate is not heavy.
That leverage is why posts matter so much in Denton County. Where the soil is clay it heaves and shrinks with the seasons. Where it is sandy it lets a post creep. A heavy gate on a shallow post will lean sooner or later in either one.
Swing openers on sagging gates
A swing opener pushes against the gate at one point. If the gate drags, the opener feels resistance, stops or reverses, and eventually wears out its gears. We always fix the gate first, then reset the opener limits and force so the two work together again.
What it costs
Swing repairs range from a hinge adjustment to resetting a post, so call for pricing on your gate. Ask about current discounts when you call.
Quick checks from the driveway
- Hold a level against the hinge post to see whether it leans
- Lift the latch end gently and watch for movement at the hinges
- Look for cracked welds or loose bolts on hinges and opener brackets
- Check whether the gate now scrapes a spot on the drive it used to clear
Stay clear while it misbehaves
A gate with a cracked hinge or weld can come loose and fall. If the hinge looks damaged, prop the gate open securely or keep everyone away from it until it is repaired.
Questions people ask us
Is a sagging gate worth repairing, or does it need replacing?
In most cases. New hinges, frame bracing or a reset post usually bring it back. Replacement only makes sense when the frame itself is badly rusted or broken.
Why does my double gate not meet in the middle?
One leaf has dropped, a hinge has worn, or the opener on one side is stopping at a different point. We check the gate and then the opener settings.
Will a heavier gate damage my opener?
It can. Openers are rated for gate weight and length. A gate heavier than the rating wears the opener early and may trip its safety settings.
Do you work on pipe ranch gates?
Yes, and on the openers that drive them. See our ranch gate opener page for more on long gates and solar power.
Other gate work we do
- Gate Post & Hinge RepairLeaning posts, new footings, weld-on and heavy-duty hinges, latch posts and pipe gate posts.
- Gate Welding & Frame RepairCracked welds, bent frames, brackets, pickets, rust and impact or storm damage.
- Ranch Gate Opener RepairSolar openers, pipe gates, batteries and long-range remotes on acreage.
Swing Gate Repair in Denton County: call any hour
We pick up 24 hours, 7 days a week. Call for pricing on your gate. Ask about current discounts when you call.