Gate Keypad and Remote Repair
Most days, the only part of the gate you touch is a keypad or a remote. When either one stops working, the gate seems broken even though the opener is fine.
Open 24 hours, 7 days a week

What you might be seeing
Keypad lights but nothing happens
The keypad has power and the code is wrong, the wiring to the opener is damaged, or the opener is not responding.
Keypad completely dark
A wiring break, a dead battery in a wireless keypad, or water inside the housing.
One remote dead, others fine
Almost always the remote battery or the remote itself.
All remotes stopped together
The receiver lost its memory, often after a surge or a board reset.
Remote only works from very close
Weak remote battery, a damaged antenna, or new interference.
Buttons stick or skip
Sun and weather wear keypad buttons. Replacement is often simple.
Keypads
A gate keypad is a small weatherproof box on a post that sends an open command when the right code is entered. Wired keypads run low-voltage cable to the opener. Wireless keypads use a battery and a radio signal. Texas sun fades and cracks the faces, and wasps love the inside of a housing. Many keypad problems come down to wiring, water or a forgotten code.
We test the keypad, its wiring and the opener input separately, reset codes and replace keypads that are worn out. We focus on keypads and remotes that open the gate itself.
On acreage the keypad often sits at the road on a long cable run back to the opener. Mowers, post-hole diggers and rodents all find that cable sooner or later. If the keypad lights up but the gate ignores it, the cable is one of the first things we test.
Remotes and receivers
Remotes are paired with a receiver, either built into the opener board or mounted as a separate module. When all remotes stop at once, the receiver is the place to look. When one stops, the remote is.
We can recode remotes, add new remotes, replace a receiver, and move or upgrade antennas to improve range on long drives.
- Recoding remotes after a board change
- Adding remotes for family, staff or a farm hand
- Replacing sun-cracked or worn keypads
- Moving receivers up and away from steel posts for better range
- Fixing keypad wiring damaged by mowers, trenching or rodents
What we do not do
We do not install or repair systems that dial residents, read cards or tie into security monitoring. If your gate uses one of those, we will tell you up front, and we can still repair the gate and opener it controls.
Pricing
Call for pricing on your gate. Ask about current discounts when you call.
Quick checks from the driveway
- Replace the remote battery and try again
- Try the keypad and another remote to see what still works
- Look inside the keypad cover for water or insects, if it opens easily
- Check whether a recent storm or power outage happened
Stay clear while it misbehaves
Stand clear of the gate while testing a keypad or remote. The gate can move as soon as the code is accepted.
Questions people ask us
Can you change my keypad code?
Yes. We can reset entry codes and show you how to change them later.
Why did all my remotes stop working at once?
Usually the receiver lost its memory after a surge or reset. The remotes can often be paired again.
Our entry box calls residents. Can you fix that part?
No. We stick to keypads and remotes whose only job is opening the gate. The gate and opener behind that box are still work we do.
Can I get extra remotes?
Yes. Tell us the opener make and the remotes you have now so we can bring compatible ones.
Other gate work we do
Gate Keypad & Remote Repair in Denton County: call any hour
We pick up 24 hours, 7 days a week. Call for pricing on your gate. Ask about current discounts when you call.