Skip to content
DentonGate Repair

Gate Post Repair and Hinge Replacement in Denton County

A gate is only as straight as the post it hangs from and the hinges that carry it. When a post leans or a hinge wears through, the gate drops, drags and misses the latch, and any opener on it starts straining.

Open 24 hours, 7 days a week

Cedar double swing gate with a black steel frame hung on strap hinges between wood posts

What you might be seeing

Leaning gate post repair or full post replacement?

Not every leaning post has to come out. If the post itself is sound and only the footing has let go, it can often be straightened, reset and anchored in new concrete. If the post is bent, rusted through at the base, rotted in the case of wood, or simply too light for the gate it carries, replacement is the repair that lasts.

We look at the post above and below grade, the concrete around it, the weight and length of the gate, and whether an opener is mounted to it. A post that carries an opener arm takes extra load on every cycle, so it gets judged more strictly than the post on a walk gate that is only opened by hand.

Gate post concrete, footings and foundations

Ground in Denton County does not hold still. Clay swells after a wet spring and shrinks in late summer, and sandy pockets let a post creep a little at a time. A shallow hole or a thin collar of concrete gives the soil an easy grip on the post. The lasting fix is a footing sized for the gate and deep enough for the soil, with the post set plumb and braced while the concrete cures.

For heavy iron or steel driveway gates we may suggest a larger steel post, such as 4x4 or 6x6 square tube, or a base plate bolted to a new pad. On a double swing gate both hinge posts are reset to match, or the two leaves will never meet cleanly in the middle.

  • Gate post straightening, reset and alignment
  • Steel, iron and wood gate post replacement, including hinge posts and latch posts
  • Heavy-duty driveway gate post installation, including 4x4 and 6x6 steel posts
  • New concrete footings and foundation replacement under failed posts
  • Base plate replacement, post anchoring and new anchor bolts
  • Support post reinforcement and reinforcement welding on broken posts
  • Rust treatment and corrosion protection at the base of steel posts

Ranch and pipe gate posts

Long pipe gates on horse and cattle property put a lot of leverage on the hinge post. A long gate does not need to be heavy to pull a post over, because the length does the work. Pipe posts on acreage are often set in plain dirt or a small collar of concrete, and they hold until a wet spell softens the ground around them.

We reset or replace pipe hinge posts, add bracing where the fence line allows it, and weld on new hinge brackets when the old ones have cracked. If the gate runs on a solar opener, our ranch gate opener page covers the power side. This page is about the post and the hardware the gate hangs on.

Gate hinge replacement and hardware

Hinges wear in predictable ways. Pins wear thin, barrels go oval, bolts loosen in their holes and welds crack where the hinge meets the frame. We replace worn hinges with a type that suits the gate: weld-on barrel hinges for steel and pipe gates, heavy-duty or ball-bearing hinges for heavy iron, adjustable hinges where you want to be able to take out a little sag later, and pivot hinges or bearings on gates built around them.

The latch side matters too. A gate that hangs straight but latches poorly will still bang, drift open in the wind or put stress on the opener.

  • Broken hinge repair and hinge welding
  • Replacing upper or lower hinges and their brackets
  • Sagging gate hinge repair and anti-sag reinforcement
  • Gate pivot repair and gate bearing replacement
  • Hinge alignment and lubrication
  • Gate latch, drop rod, cane bolt and gate stopper replacement
  • Hold-open hardware and gate lock hardware replacement

What post and hinge work costs

Resetting one post is a very different job from replacing both posts on a double driveway gate with new footings, so prices are not listed here. Call for pricing on your gate, and ask about current discounts when you call. A picture of the post base and the hinges, sent through the request form, helps us talk it through.

Quick checks from the driveway

  • Hold a level against the hinge post on two sides
  • Push the post by hand and watch the concrete for movement or cracks
  • Look at each hinge weld and bolt for cracks, gaps or rust streaks
  • Check whether the latch meets its keeper without lifting the gate
  • Note whether an opener arm is bolted to the post that is moving

Stay clear while it misbehaves

A failing post or hinge can let a gate fall. If a hinge weld has cracked or the post moves when you push it, prop the gate securely or leave it open and blocked, keep children, pets and livestock away, and do not let the opener run it until it has been checked.

Questions people ask us

Can a leaning gate post be straightened, or does it have to be replaced?

If the post itself is sound, it can often be straightened and reset in new concrete. Bent, rusted-through or undersized posts are better replaced.

Why does my gate still sag after new hinges?

New hinges cannot fix a leaning post or a frame that has gone out of square. The post, the hinges and the frame all need to be checked together.

Do you replace posts on double swing driveway gates?

Yes. Both hinge posts are set to match so the leaves meet evenly and the opener limits can be set cleanly afterward.

Can you weld new hinges onto my pipe gate?

Yes. Weld-on hinges and new hinge brackets are a common repair on pipe and steel ranch gates.

How much does gate post replacement cost?

It depends on the post size, how many posts are involved, the footing and whether an opener is mounted to it. Call (940) 240-2402 for pricing on your gate, and ask about current discounts.

Other gate work we do

Gate Post & Hinge Repair in Denton County: call any hour

We pick up 24 hours, 7 days a week. Call for pricing on your gate. Ask about current discounts when you call.

Call nowGet a quote