FAAC Gate Opener Repair in Denton County
FAAC is best known for hydraulic swing operators, including arm-style and underground units, on heavier residential and commercial gates. Hydraulic machines fail in their own ways, so they get their own checks.
- Open 24 hours, 7 days a week
- Call for pricing on your gate
- Ask about current discounts when you call
- Ranch, home and business gates

What goes wrong with FAAC hydraulic swing operators
Oil on the ram or the drive
A hydraulic operator pushes the gate with fluid under pressure. A worn seal lets that pressure bleed off, and the gate slows, drifts or stops short of closed.
Sluggish on cold mornings
Cold makes the oil inside the operator stiff. A gate that crawls at dawn on a winter morning and runs normally by afternoon is a familiar pattern, and tired seals make it worse.
Will not hold against the wind
Pressure and bypass settings decide how hard the operator pushes. Set too low, a solid gate gets pushed around by wind. Set too high, the gate is dangerous to anyone in its path.
Pump hums, gate stays put
Low fluid, a release valve left open after manual use, or an internal fault can all let the pump run without moving the gate.
Before you call
Look for the label on the operator, usually inside the cover or on the side of the housing, and have the brand, model and serial number ready. It also helps to know:
- Whether there is oil on the operator or the ground below it
- Whether it is worse on cold mornings
- If someone recently used the manual release
Related gate work
FAAC questions
There is fluid under my FAAC operator. Can I keep using the gate?
A leak means the operator is losing pressure and may not hold or stop the gate the way it should. Use it as little as possible and call so the seals and fluid can be checked.
Do you come out for FAAC gates outside Denton?
Yes. We work on FAAC equipment across Denton County, including acreage outside city limits, 24 hours a day. Call (940) 240-2402 with the address and what the gate is doing.
What does FAAC gate repair cost?
It depends on what failed, the model and the parts it needs, so prices are not posted. Call (940) 240-2402 for pricing on your gate, and ask about current discounts.
Are you a FAAC dealer?
No. Denton Gate Repair is an independent repair company and is not affiliated with FAAC. We repair the equipment you already have on your gate.
FAAC is a trademark of its owner. Denton Gate Repair is an independent repair company, not affiliated with or endorsed by any manufacturer.
FAAC gate stuck? Call any hour.
We pick up 24 hours, 7 days a week. Call for pricing on your gate. Ask about current discounts when you call.